Football Helmet Buying Guide
Today’s football helmets offer superior protection for the player and come in a variety of sizes with different padding systems. It is important to know the different components when purchasing a football helmet.
Youth models are obviously designed to fit a smaller player’s head. Additionally, these typically use a different type of plastic, such as ABS; which is very durable but less expensive than tougher plastics used in adult helmets.
Adult helmets generally use a Lexan Polycarbonate shell which is a very resilient material.
* Air Systems
Helmet manufacturers do offer models with an air system liner, usually called a “bladder”. This is designed to return the air system or “bladder” to its original state after an impact much more rapidly than foams or straps. Air systems withstand repeated blows better than helmets that use just foam pads. In addition, air systems are generally more comfortable and provide for an easy fit since air can be adjusted to tighten the helmet to your head’s specific shape. They are usually offered in fewer sizes. This is because of their characteristics, they fit a wider size range in each.
Helmets come with a series of pads, usually foam – that cushion the head, jaw and bridge of the nose. These pads come standard with any helmet that you buy. Replacement pads, liner padding systems and liners also are offered. These parts are usually interchangeable to allow for proper fitting.
Pads may be designed specifically for your helmet model and are not interchangeable across manufacturers, but may be through their respective models. Pad systems include front and back sizes to adjust the helmet’s fit.
Pads for the top, side and back of the helmet and jaw pads also are part of the padding system Manufacturers offer these pads in different thickness, ranging from 1/2 to 1 inch, to allow you to select the firmness that you prefer, or for fitting variations.
NOCSAE stands for the National Operating Committee on Standards for Athletic Equipment, a voluntary organization that has developed standards for a variety of sports protective equipment Any helmet that bears the NOCSAE seal shows the manufacturer has met the standards at the time the helmet was manufactured.
Chin straps perform two functions:
First, they protect the chin area, with a cup that fits snugly underneath and around the chin.
Second, the straps snap onto your helmet to hold it firmly on your head. That’s why it’s crucial to keep it centered and without slack. Helmets come with standard chinstraps, but you can buy different styles and replacement straps.
Helmets come in two basic ways: with and without the mask.
There is an array of face masks offered, each designed to protect various parts of the face and to optimize protection for different players while still allowing them the best visibility to play their position.
Manufacturers often use letters to designate a facemask’s designed protection:
OPO–Oral Protection Only
JOP–Jaw and Oral Protection
NOPO–Nose and Oral Protection Only
NJOP–Nose, Jaw and Oral Protection
EGOP–Eye Glass and Oral Protection
In order to protect the carbon steel that is generally used in facemasks, manufacturers may offer different coatings, with a premium paid for more durable coatings.
Face Guard Styles
There are many styles of face guards to help you maximize needed protection while still being able to play your position. These differences are usually indicated by an abbreviation:
Refers to the reinforced bar at the top of the facemask. This strengthens the facemask and minimizes the chance of vertical spreading.
DW: Double Wire Configuration
This adds stability and strength. It also decreases the opening in the facemask so hand, fingers and feet are less likely to strike your face. This design minimizes the chance of horizontal spreading, important for linemen or for other positions where you either block or tackle and end up in the pile.
SW: Single Wire Configuration
This eliminates a bar running in the “east-west” direction. This design will suit you if you play a position where visibility is critical.
UB: U-Bar Attached
This often times is called a bull ring. As with a Double Wire design, the U-Bar also is designed to minimize fingers, hands or feet from striking your nose.
SK: Skill Position Players
Designed for skill position players since the side bar is angled back for better peripheral vision. It’s also slightly longer.
Face Guard Sizes
Sizes typically run youth, regular and extra-large to correspond to each manufacturer’s sizing system.
Youth model face masks typically should fit all sizes of youth helmets.
Regular size face masks should fit small, medium and larger shell sizes of adult / varsity helmet models.
X-large face masks fit the same size shell as regular size face masks and can also be used on large sizes when a player may need the extra protection.
Determining Your Helmet Size
Have someone help measure you with a measuring tape or head caliper at 1″ above the eyebrows to determine the size of your head. This then will correspond to the various sizes offered in helmet models.
Helmet manufacturers strongly suggest you maintain a moderate to short hairstyle during the season. Severe changes in hair length often require a new fit. Dampen your hair to approximate sweat conditions; towel off excess water.
The front of the helmet should sit 1″ above the eyebrow. This is the point at which the head was measured and is the point at which you can encompass the largest percentage of head mass.
When pressing downward with the fingers interlocked on the top of the helmet, the pressure should be on the crown of the head and not on the brow.
The chinstrap should be exactly centered and without slack to anchor the helmet properly.
Keep in mind that not all manufacturers size the same. Please see specific sizing charts for each helmet model.
DO NOT USE FACE MASKS/HELMET SYSTEMS TO BUTT, RAM OR SPEAR AN OPPOSING PLAYER. THIS IS IN VIOLATION OF THE FOOTBALL RULES AND CAN RESULT IN SEVERE HEAD, BRAIN, OR NECK INJURY, PARALYSIS OR DEATH TO YOU, AND POSSIBLE INJURY TO YOUR OPPONENT. THERE IS THE RISK THAT THESE INJURIES MAY ALSO OCCUR AS A RESULT OF ACCIDENTAL CONTACT WITHOUT INTENT TO BUTT, RAM OR SPEAR. NO FACE MASK/HELMET SYSTEM CAN PREVENT ALL SUCH INJURIES.